Cooper Lighting Halo SYNCHRO PAR30 Specifications

Dimensions
Synchro PAR30 Metal Halide Lampholder
Length (L): 10.50" [266mm]
Width (W): 5.00" [127mm]
Max Extension:
Halo Flexible Track 14.75" [374mm]
Halo Power-Trac 15.25" [387mm]
Halo Architectural Track 15.30" [389mm]
Description
Lamp: 39W, 70W PAR30
Finish: Aluminum Haze (AH)
Accessories: Accepts up to 3 media.
L200 series lenses
L275MB Cube Cell Louver
L250 Linear Spread Lens
L265 Prismatic Spread Lens
Dimensions
Synchro PAR38 Metal Halide Lampholder
Length (L): 13.12" [333mm]
Width (W): 5.50" [140mm]
Max Extension:
Halo Flexible Track: 16.25" [412mm]
Halo Power-Trac: 17.00" [431mm]
Halo Architectural Track: 16.80" [426mm]
Description
Lamp: 70W PAR38 Metal Halide
Finish: Aluminum Haze (AH)
Accessories: Accepts up to 3 media
L200 Series Lenses
L275MB Cube Cell Louver
L250 Linear Spread Lens
L265 Prismatic Spread Lens
5
Track Lamp Type
LF=Flexible Track 5=Metal Halide
L=Halo Power-Trac
LA=Halo Architectural
Track
Electrical Quick Lock Adapter
Flexible Track Models:
Die Cast housing. Attaches electrically and mechanically anywhere along track.
Halo Power-Trac Models:
Polycarbonate housing. Attaches electrically and mechanically anywhere along track.
Halo Architectural Track Models:
Polycarbonate housing with integral fuse and on-off switch. Attaches electrically and mechanically anywhere along track.
Halo
Flexible Track
Max
Extension
L
W
Halo
Flexible Track
Max
Extension
L
W
06
Series Lamp Wattage
06=Synchro 30=PAR30 39=39W (PAR30 only)
38=PAR38 70=70W
• ARCHITECTURAL FLEXIBLE TRACK
• HALO LINEAR ARCHITECTURAL TRACK
• HALO POWER-TRAC
Halo Halo
Power-Trac Architectural Track
Halo Halo
Power-Trac Architectural Track
Finish
AH=Aluminum Haze
P=White (L and LA only)
MB=Black (L and LA only
HALO ®
SYNCHRO
PAR30 Metal halide
SYNCHRO
PAR38 metal halide
•
Cylinder with rectangular
cross section yoke, lockable
tilt and rotation aiming and
graduated aiming guides
• Aluminum die cast yoke
allows lampholder to rotate
330° and provides 0° to 90°
vertical pivot for maximum
aiming adjustability.
• Lampholder tilt and
rotation can be locked in
place easily without the use
of tools.
• Machined, Extruded and
Die Cast Aluminum
cylinders.
• Fixture provided with cover
glass (required for use with
lamps that are not rated for
use with open fixtures).
COOPER LIGHTING
355