NAT-FMC-SDR4 V1.3 ECHNICAL EFERENCE ANUAL REFACE 1.1. Disclaimer The following documentation, compiled by N.A.T. GmbH (henceforth called N.A.T.), represents the current status of the product´s development. The documentation is updated on a regular basis. Any changes which might ensue, including those necessitated by updated specifications, are considered in the latest version of this documentation.
NAT-FMC-SDR4 V1.3 ECHNICAL EFERENCE ANUAL 1.2. About This Document This document is intended to give an overview on the NAT-FMC-SDR4’s functional capabilities. Preface General information about this document Introduction Abstract on the NAT-FMC-SDR4’s main functionality and application field Quick Start...
EFERENCE ANUAL NTRODUCTION The NAT-FMC-SDR4 is a mezzanine board in FMC form factor with integrated hardware elements, which make it the ideal platform for sophisticated wireless, machine vision, and SDR applications. One or two of these mezzanines can be mounted on a NAT-AMC-ZYNQUP-FMC carrier board.
ANUAL UNCTIONAL ESCRIPTION The NAT-FMC-SDR4 can be divided into a number of functional blocks, which are described in the following paragraphs. As the NAT-FMC-SDR4 is intended to be operated with the NAT-AMC-ZYNQUP-FMC carrier only, the following figure gives an overview on the functional blocks of the whole combination.
V1.3 ECHNICAL EFERENCE ANUAL 4.1. RF-Transceiver Both variants of the NAT-FMC-SDR4 feature two Analog Devices ADRV9009 transceiver units. Every transceiver offers two transmitter-, two receiver-, and two observation receiver- interfaces. Table 2 – Key Data RF-Transceivers Parameter Value Maximum receiver bandwidth...
NAT-FMC-SDR4 V1.3 ECHNICAL EFERENCE ANUAL ARDWARE 5.1. Front Panel and LEDs The front plate appearance and the labelling vary depending on the number and variant(s) of installed FMCs. The figure below shows the full-size version, the NAT-AMC-ZYNQUP-SDR8, which is fully equipped with two FMCs.
NAT-FMC-SDR4 V1.3 ECHNICAL EFERENCE ANUAL Figure 5 – NAT-FMC-SDR4-M Location Diagram – Top Trans- ceiver Power Supply Trans- ceiver Figure 6 – NAT-FMC-SDR4-M Location Diagram – Bottom Power Supply Connectors on top side: drawings imply the board is orientated with the front panel interfaces...
NAT-FMC-SDR4 V1.3 ECHNICAL EFERENCE ANUAL 5.2.1. J1/J2: Multi-Coax Connectors Connectors J1 and J2 offer access to the RF-transceiver interfaces towards the front panel with the signals routed via the pins and ground connected to the shield. Note: An associated cable set is available as order option.
NAT-FMC-SDR4 V1.3 ECHNICAL EFERENCE ANUAL RoHS directive if it does not belong to one of the groups of products exempted from the RoHS directive. Although many of hardware products of N.A.T. are exempted from the RoHS directive it is a declared policy of N.A.T.
NAT-FMC-SDR4 V1.3 ECHNICAL EFERENCE ANUAL the ECHA candidate list. Article 7(2) of REACH is notable as no substances are intentionally being released by NAT products and as no hazardous substances are contained. Information remains in effect or will be otherwise stated immediately to our customers.