Table of Contents
Advertisement
[CUST. SET MEM.]
•
Refer to
P111
for details.
[Fn BUTTON SET]
•
Refer to
P124
for details about the [REC] Mode menu.
[LCD MODE]
LCD
•
The brightness of the pictures displayed on the LCD monitor is increased so some subjects
may appear differently on the LCD monitor. However, this does not affect the recorded pictures.
•
The LCD monitor automatically returns to normal brightness after 30 seconds when recording
in Power LCD Mode. Press any button to make the LCD monitor bright again.
•
If the screen is difficult to see because of light from the sun etc. shining on it, use your hand or
another object to block the light.
•
The number of recordable pictures decreases in Auto Power LCD Mode and Power LCD Mode.
•
[AUTO POWER LCD] cannot be selected in Playback Mode.
[DISPLAY SIZE]
Preparation
Up to 3 current camera settings can be registered as custom
settings.
(Recording Mode only)
Assign [REC] Mode menu to 4 button. It is convenient to register
a [REC] Mode menu that is used often.
(Recording Mode only)
[ASPECT RATIO]/[QUALITY]/[METERING MODE]/[WHITE
BALANCE]/[I.EXPOSURE]/[COLOR EFFECT]/[GUIDE LINE]/
REC AREA]/[REMAINING DISP.]
[
These menu settings make it easier to see the LCD monitor when
you are in bright places.
[OFF]
„ [AUTO POWER LCD]:
The brightness is adjusted automatically depending on how bright
it is around the camera.
... [POWER LCD]:
The LCD monitor becomes brighter and easier to see even when
taking pictures outdoors.
Change the display size of some icons and menu screens.
[STANDARD]/[LARGE]
- 31 -
Advertisement
Table of Contents
