Connecting The Power Cable - Pioneer AVR-W6100 Owner's Manual

Overhead display
Hide thumbs Also See for AVR-W6100:
Table of Contents

Advertisement

Available languages

Available languages

Connecting the System

Connecting the Power Cable

29
This product
Power cable
30 cm
30 cm
30 cm
6 m
Fuse resistor
6 m
Fuse holder (4 A)
1.5 m
Light green/black
Connect to the Dome Light Switch's – lead
wire.
White/yellow
Connect to the Door Switch.
Light green/red
Connect to the Dome Light Switch's + lead
wire.
Note:
• A car's door switch polarity depends
on the car. For details, consult the
vehicle's Owner's Manual or ask the
dealer. For details, consult the vehicle
Owner's Manual or dealer.
Red
To the electric terminal controlled by the igni-
tion switch (12 V DC) ON/OFF.
Do not connect this lead to power source termi-
nals to which power is continuously supplied.
If the lead is connected to such terminals, the
battery may be drained.
Yellow
To the terminal always supplied with power
regardless of ignition switch position.
Black (ground)
To vehicle (metal) body.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents