Remove the battery pack
Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 32
Step 1.
Disconnect the battery pack cable from the system board, remove five screws and then remove the
battery pack.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Figure 8. Remove the battery pack
Screw specifications
M2 x L4
Step 2.
Remove the battery pack mylar.
Figure 9. Remove the battery pack mylar
Go to
https://support.lenovo.com/partslookup
part:
Battery pack
Battery pack mylar
Remove the solid-state drive (SSD) module (2242)
Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 32
34
Hardware Maintenance Manual
Number of screws
5
to look up the Lenovo part number of the following replacement