When Connecting To Separately Sold Power Amp - Pioneer AVH-P3100DVD Installation Manual

Connecting the units

When connecting to separately sold power amp

Rear output or
subwoofer output
Front output
This product
Blue/white
Connect to system control terminal of the
power amp or auto-antenna relay control
terminal (max. 300 mA 12 V DC).
When you connect the separately sold
multi-channel processor (DEQ-P8000) to this
unit, do not connect anything to the speaker
leads and system remote control (blue/white).
When you connect the multi-channel processor
to this unit, refer to multi-channel processor's
installation manual for the connection method.
Note:
· Change the initial setting of this unit
(refer to the Operation Manual).
The subwoofer output of this unit is monaural.
8
To rear output or
subwoofer output
To front output
Connect with RCA cables (sold
separately)
Left
Front speaker
Rear speaker
or Subwoofer
Power amp
(sold separately)
System remote control
Right
 
Front speaker
 
 
Rear speaker
 
or Subwoofer
Perform these connections when
using the optional amplifier.
Power amp
(sold separately)