Din Rear-Mount; Fixing The Front Panel - Pioneer DEH-P680MP Installation Manual

Pioneer deh-p680mp: install guide

Hide thumbs Also See for DEH-P680MP:

Available languages

Enlarged version

Installation

DIN Rear-mount

Installation using the screw holes on the side of the unit

1. Remove the frame. (Fig. 8)

Frame

To remove the frame, extend top and

bottom of the frame outwards in

order to unlock it. (When reattaching

the frame, point the side with a

groove downwards and attach it.)

• It becomes easy to remove the

frame if the front panel is released.

2. Fastening the unit to the factory radio mounting bracket.

(Fig. 9) (Fig. 10)

Select a position where the screw holes of the bracket and

the screw holes of the head unit become aligned (are fitted),

and tighten the screws at 2 places on each side. Use either

truss screws (5 × 8 mm) or flush surface screws

(5 × 9 mm), depending on the shape of the screw holes in

the bracket

Screw

Dashboard or Console

Factory radio mounting bracket

If you do not operate the removing and attaching the front panel function, use the supplied

fixing screw to fix the front panel to this unit.

Fixing screw

Fig. 8

Fig. 9

Fig. 10

Fig. 11

Table of Contents