Bluetooth Operation - Philips TAB8505 User Manual

CENT (CENTER)
(TAB8805, TAB8905 only)
Adjust the Center Channel Volume
» CTR -5 ~ CTR +5
» By default, the center channel volume
is set to 0.
TOP
(TAB8905 only)
Adjust the Top Channel Volume
» TOP +5 ~ TOP –5
» By default, the top channel sound is set
to 0.
DIM
Set display brightness.
» DIM 03, DIM 02, DIM 01
» By default, the dimmer is set to DIM 03.
DISPLAY
Set to turn off the display automatically (except
the Wi-Fi LED indicator) after 3 seconds of idle
when no user operation.
» ON: Set to display on
» OFF: Set to display off
» By default, the display is set to ON.
KEY TONE
Turn On/off the key tone
» ON: Set to ON
» OFF: Set to OFF
» By default, the key tone is set to off.

Bluetooth Operation

Through Bluetooth, connect the Soundbar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
you can listen to the audio files stored on the
device through your Soundbar speakers.
18
1
Press the button repeatedly on the unit
or on the remote control to switch the
Soundbar to Bluetooth mode.
» NO BT is displayed on the display
panel.
2
On the Bluetooth device, switch on
Bluetooth, search for and select Philips
TAB8505 to start connection (see the user
manual of the Bluetooth device on how to
enable Bluetooth).
3
Wait until you hear the voice prompt from
the Soundbar.
» If the successfully connected, BT is
displayed on the display panel.
4
Select and play audio files or music on your
Bluetooth device.
• During play, if a call is coming, music play
is paused. Play resumes when the call
ends.
• If your Bluetooth device supports
AVRCP profile, on the remote control
you can press
press to pause/resume play.
5
To exit Bluetooth, select other source.
• When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
• If you want to connect your Soundbar
with another Bluetooth device, press
and hold
disconnect the currently connected
Bluetooth device.
Note
•
A Bluetooth device which supports Bluetooth profile A2DP,
AVRCP and with Bluetooth version as 4.2 + EDR.
•
The maximum operational range between the
Soundbar and a Bluetooth device is approximately
10 meters (30 feet).
•
Compatibility with all Bluetooth devices is not
guaranteed.
•
The music streaming may be interrupted by obstacles
between the device and Soundbar, such as wall, metallic
casing that covers the device, or other devices nearby
that operate in the same frequency.
/ to skip to a track, or
on the remote control to