CONTENTS General Safety Installation Wall Mounting Instructions Controls and Connections Remote Control Getting Started Basic Operations Media Menus Picture Settings Sound Settings Channel Settings Lock Settings Time Settings Setup Settings Recording FAQs Specifications Last Page Customer Helpline Last Page...
GENERAL SAFETY Read this manual thoroughly before you start using the TV. Store this manual, the completed warranty card, your receipt and the product packaging. The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings.
Page 5
GENERAL SAFETY (CONT.) IMPORTANT INFORMATION • Do not expose this appliance to rain or moisture as it may result in fire or an electric shock hazard • Do not tamper or change or modify the product in any way. • Only use Accessories outlined and recommended by the manufacturer. •...
Page 6
GENERAL SAFETY (CONT.) • Please beware that Dust could accumulate over time on the unit and cause it to generate heat and or deteriorate insulation, which in turn may result in an electrical fire. • The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or young children of any age, They must be supervised product by a person responsible for their safety.
Page 7
GENERAL SAFETY (CONT.) Please make sure upon positioning this product, the place is: • Not wet or damp and Well ventilated • Away from direct sunlight or heaters. • Away from splashes or food. • Protected from excessive dust or grease. •...
INSTALLATION Install the stand as described below, or if you want to mount it to a wall, please contact a professional installer. Please ensure the TV is not plugged into the wall socket and furthermore we recommend to get another person to assist in the following task. Attaching the stand Step 1 Place a soft cushioned material on top of a flat surface to prevent damaging the screen...
INSTALLATION (CONT.) Wall-Mounting Instructions Please ensure the TV is not plugged into the wall socket and furthermore we recommend to get another person to assist in the following task. • We recommend you use a professional installer as we assume no liability for any eventual damage to the product or injury to yourself if you mount the TV on your own.
Page 11
CONTROLS AND CONNECTIONS POWER INPUT HEADPHONE INPUT HDMI 1 (ARC) / HDMI 2 PC AUDIO MINI YPBPR INPUT MINI AV INPUT USB 1 / 2 INPUT OPTICAL OUTPUT RF (ANTENNA) USB connection Insert a USB storage device into the USB port to record, playback of video/music/photo...
Page 14
REMOTE CONTROL (CONT.) Using the Remote Control • Battery should normally last for about one year. • Do not mix old and new batteries in the remote • Do not use different types of battery • If you do not intend to use the unit for a long time, please remove batteries from the remote to avoid accident.
Getting Started TURN THE POWER ON OR OFF: • Plug the power cord into a suitable power point, • Turn on the power switch. • Press the STANDBY/ON button • When you switch on the TV for the first time, the First Time Setup menu will be displayed on the screen, as per the image below.
Basic Operations Selecting an Input Source Press the SOURCE button on the remote control, to display the input source list. • buttons to select the input source, and then press OK to confirm. • Press the • You can access connected USB drives by selecting USB. •...
Media MEDIA PLAYBACK • First insert a USB Device into the TV • Press “USB” on SOURCE Menu. • Use the directional arrow keys to Select FILE TYPE and then through folders within your USB device to access your file. Press the EXIT button to return to previous page •...
Menus (CONT.) LOCK MENU To access LOCK settings, press the MENU button and go to Lock. Default factory password is “0000”, then you can set your own password to lock the TV. Master Password is: “4711”...
Electronic Program Guide (EPG) EPG Guide (DTV Mode Only) • Press the TVG button on the remote control to display the above interface. • Before viewing EPG information, you have to ‘activate’ each channel for which you want to view program information. To do this, press the buttons to select a channel in the left column, then press OK to confirm.
FAQS GENERAL PROBLEMS WITH TV SET PROBLEM SOLUTION No Power. Make sure power plug is inserted correctly into power outlet. No Picture. Make sure the following is connected correctly • Adjust the antenna • Move TV away from any products that may cause interference. •...