Table of Contents
Advertisement
2
Select the aperture value (F-
number) with the control dial.
• Smaller F-number: The foreground and
background of the subject are blurred.
Larger F-number: The subject and its
foreground and background are all in
focus.
• You cannot check the blurring of an
image on the LCD monitor or in the
viewfinder. Check the recorded image
and adjust the aperture.
3
Adjust the focus and shoot the
subject.
The shutter speed is automatically
adjusted to obtain correct exposure.
• When the camera judges that the proper
exposure is not obtained with the
selected aperture value, the shutter
speed flashes. In such cases, adjust the
aperture again.
Shooting techniques
• The shutter speed may become slower depending on the aperture value.
When the shutter speed is slower, use a tripod.
• To blur the background more, use a telephoto lens or a lens that is
equipped with a smaller apperture value (bright lens).
• Set the flash mode to
(page 82). However, the flash range differs according to the aperture
value. When you shoot with the flash, check the flash range (page 84).
60
(Fill-flash) when you shoot with the flash
Aperture (F-number)
Shutter speed
Advertisement
Table of Contents
