Replace A Cru; Pen Dummy (For Selected Models); Base Cover Assembly - Lenovo 82S10004IX User Manual

2. Click Power Options, and then click Choose what the power buttons do on the left pane.
3. Click Change settings that are currently unavailable at the top.
4. If prompted by User Account Control (UAC), click Yes.
5. Clear the Turn on fast startup check box, and then click Save changes.
To disable the built-in battery:
1. Enter the setup utility.
2. Select Configuration ➙ Disable Built-in Battery and press Enter.
3. Select Yes in the Setup Confirmation window. The built-in battery is disabled and the computer turns off
automatically. Wait three to five minutes to let the computer cool.

Replace a CRU

Follow the replacement procedure to replace a CRU.

Pen dummy (for selected models)

Prerequisite
Before you start, read
Generic Safety and Compliance Notices
For access, do the following:
1. Ensure that your computer is off or in sleep mode. Disconnect the computer from ac power and all
connected cables.
2. Close the computer display and turn the computer over.
Removal procedure

Base cover assembly

Prerequisite
Before you start, read Generic Safety and Compliance Notices
Note: Do not remove the base cover assembly when your computer is connected to ac power. Otherwise,
there might be a risk of short circuits.
For access, do the following:
1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 25.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn over the computer.
26
Lenovo 13w Yoga User Guide
and print the following instructions.
and print the following instructions.