Dust/Chip Extraction; Connecting A Dust Extraction Unit; Selecting A Tool - Parkside 360583 2010 Translation Of The Original Instructions

Dust/chip extraction

Materials containing asbestos must not be
processed . Asbestos is a known carcinogen .
WARNING! RISK OF FIRE!
■ When working with electrical appliances
which can be connected to a vacuum cleaner
via a vacuum cleaner adapter, there is a risk
of fire! In unfavourable conditions, e .g . when
sparks are flying while sanding metal or
metal residues in wood, wood dust in the bag
of the vacuum cleaner can spontaneously
ignite . This is a particular risk if the wood dust
is mixed with paint residues or other
chemicals and the workpiece has become hot
after being worked for a long time . Therefore,
avoid overheating of the material being
sanded as well as the appliance . Always
empty the vacuum cleaner's dust bag before
taking work breaks .
■ Always use dust extraction .
■ Ensure that your workplace is adequately
ventilated .
■ Observe the regulations applicable in your
country regarding the materials to be worked .

Connecting a dust extraction unit

♦ Place the dust extraction unit
appliance and fix it into place on the appliance
with the screw .
♦ Fit the angle adapter
unit .
The angle adapter
180° .
■ 50 │ GB │ MT
under the
onto the dust extraction
can be turned by up to

Selecting a tool

NOTE
► The universal fitting with its easy tool change
function is suitable for standard accessories .
HCS plunge saw blade 32 mm
Materials
wood, plastic, gypsum (plaster) and other soft
materials
Application
–
separation and plunge saw cuts
–
sawing close to edges, even in hard-to-reach
areas
Example sawing recesses in lightweight walls .
Diamond saw blade
Materials
Tile adhesives, tile joints
PAMFW 20-Li A1