Dell P51G Owner's Manual page 43

Option Description
Boot List Option
Advanced Boot This option allows you the legacy option ROMs to load. By default, the Enable Legacy
Options Option ROMs is enabled.
Date/Time Allows you to change the date and time.
Table 3. System Configuration
Option
Integrated NIC
SATA Operation
Drives
SMART Reporting
USB Configuration
Description
Allows you to configure the integrated network controller. The options
are:
• Disabled
• Enabled
• Enabled w/PXE: This option is enabled by default.
Allows you to configure the internal SATA hard-drive controller. The
options are:
• Disabled
• AHCI: This option is enabled by default.
Allows you to configure the SATA drives on board. All drives are enabled
by default. The options are:
• SATA-0: This option is selected by default.
This field controls whether hard drive errors for integrated drives are
reported during system startup. This technology is part of the SMART
(Self Monitoring Analysis and Reporting Technology) specification. This
option is disabled by default.
• Enable SMART Reporting
This field configures the integrated USB controller. If Boot Support is
enabled, the system is allowed to boot any type of USB Mass Storage
Devices (HDD, memory key, floppy).
If USB port is enabled, device attached to this port is enabled and
available for OS.
If USB port is disabled, the OS cannot see any device attached to this
port.
• Enable Boot Support
• Enable External USB Port
• Enable USB3.0 Controller
By default, all the options are checked.
You can also deselect any option or
change the boot order.
Allows you to change the boot list option.
• Legacy
• UEFI
43