Advertisement
Quick Links
Fiber Optic
PMN-1
T
he Pico Macom model PMN-1 is a compact, cost-effective and fully featured indoor optical node specifically designed
for the delivery of analog and digital video, high-speed data and telephony signals into homes. This unit has diverse ap-
plications in MDU, industrial, government and educational institutions for the delivery of current and future broadband
CATV services. The fiber core employed in the unit design is a 1310/1550 nm optical receiver with a wide optical input
window of -6 to 3dBm. The PMN-1 has an integrated optical attenuator and equalizer and a precision LED to indicate re-
ceived optical power. The power is provided through coaxial cable (line) or an external wall mount power adaptor. The unit
employs GaAs amplifier technology for excellent broadband RF performance and spurious-free RF output.
Features
•
Compact, 5˝ x 3˝ x 1.3˝ precision aluminum
die-cast case guarantees excellent mechanical
integrity, ease of installation and shielding
effectiveness.
•
Bi-directional operation with forward bandwidth
from 54~1000MHz (analog and digital) and re-
verse bandwidth from 5~42MHz.
•
Wide optical input range (-6dBm to 3dBm)
provides excellent operation at low optical
input levels.
•
Full 25dBmV typical RF output for superior C/N
performance.
•
Return loss guarantees excellent impedance match
across the frequency band with minimal reflection
and cross coupling between ports.
www.picomacom.com
Series
Mini-Indoor Optical Node
6260 Sequence Drive San Diego, CA 92121
Ph: 858-546-5050 Toll Free: 800-421-6511 Fax: 858-546-5051
PICO MACOM
•
Optical power monitoring for optimal optical
input and output power range indication.
•
Calibrated 1V/mW optical input test point for
signal monitoring.
•
12Vdc line powered with a wall mounted 20/240Vac
wall adaptor. Integrated high linearit optical receiver
and transmitter for two-way operation.
Ordering
Information
PMN-1 Mini-Indoor Optical Node
Rev. 9/07
Advertisement
Summary of Contents for Pico Macom PMN-1
- Page 1 CATV services. The fiber core employed in the unit design is a 1310/1550 nm optical receiver with a wide optical input window of -6 to 3dBm. The PMN-1 has an integrated optical attenuator and equalizer and a precision LED to indicate re- ceived optical power.
- Page 2 PICO MACOM FIBER IN OPT. POWER FIBER OUT LEASER POWER Forward Receiver Symbol Parameter Optical Wavelength V Opt. In. Monitor Voltage P in Optical Input Power Frequency Range Freq. Response Flatness Output Return Loss Output Level Optical Return Loss Composite Triple Beat Composite Second Order * Test results are typical and were performed at our San Diego test center.