Related Manuals for Pico Macom MX-7
Summary of Contents for Pico Macom MX-7
- Page 1 MX-7 Passive 7-Channel VHF Separator-Combiner Installation and Operation Manual Operation www.picomacom.com Ph:800-421-6511 Manual Rev. 04/03...
-
Page 2: Product Inspection
To insure proper installation and operation, take a moment to read this guide before proceeding with the installation. If you have any questions or comments about the MX-7 Passive 7-Channel VHF Separator-Combiner, please contact your dealer or have him contact the PICO MACOM Service Center at these phone numbers: 800-421-6511, 818-493-4300. - Page 3 THAT PROVIDES GUIDELINES FOR PROPER GROUNDING AND, IN PARTICULAR, SPECIFIES THAT THE CABLE GROUND SHALL BE CONNECTED TO THE GROUNDING SYSTEM OF THE BUILDING, AS CLOSE TO THE POINT OF CABLE ENTRY AS PRACTICAL. Ph:800-421-6511 www.picomacom.com Safeguards MX-7 Rev. 04/03...
- Page 4 The MX7 used as a separator significantly reduces system harmonics when used prior to a series of Pico Macom’s XBS single channel strip amplifiers or signal processors. The MX7 used as a combiner is the perfect filtration system to be used when combining outputs from channel specific VHF antennas before insertion into a cable system via Pico Macom’s TA52...
-
Page 5: Specifications
1. Connect the cable from a VHF broadband antenna to the common connection of the MX-7. 2. Connect a cable from the MX-7 single channel outputs to channel- ized amplifiers or combining system. 3. Connect a signal level meter to the headend common test point 4. -
Page 6: Limited Warranty
We will issue an invoice for the List Price of the loaner unit plus shipping costs. When you receive the loaner unit, pack the failed unit in the loaner unit’s box and ship it freight prepaid to Pico Macom for repair. When you receive the repaired unit, a new RMA number will be provided in the box. Carefully pack the loaner unit and affix the new RMA number on the box and ship it back to us for full credit excluding shipping costs.