GMC Yukon XL 2013 Owner's Manual page 393

Light Truck (LT-Metric) Tire
(A) Tire Size The tire size
:
code is a combination of letters
and numbers used to define a
particular tire's width, height,
aspect ratio, construction type,
and service description. See the
Tire Size illustration later in this
section for more detail.
(B) TPC Spec (Tire
Performance Criteria
Specification) Original
:
equipment tires designed to
GM's specific tire performance
criteria have a TPC specification
code molded onto the sidewall.
GM's TPC specifications meet or
exceed all federal safety
guidelines.
(C) Dual Tire Maximum Load
Maximum load that can be
carried and the maximum
pressure needed to support that
load when used in a dual
configuration. For information on
recommended tire pressure see
Tire Pressure on page 10 50
and Vehicle Load Limits on
page 9 16.
(D) DOT (Department of
Transportation) The
:
Department of Transportation
(DOT) code indicates that the
tire is in compliance with the
U.S. Department of
Transportation Motor Vehicle
Safety Standards.
Vehicle Care
DOT Tire Date of
Manufacture The last four
:
digits of the TIN indicate the tire
manufactured date. The first two
digits represent the week
(01-52) and the last two digits,
:
the year. For example, the third
week of the year 2010 would
have a four-digit DOT date
of 0310.
(E) Tire Identification Number
(TIN) The letters and numbers
:
following the DOT code are the
Tire Identification Number (TIN).
The TIN shows the
manufacturer and plant code,
tire size, and date the tire was
manufactured. The TIN is
molded onto both sides of the
tire, although only one side may
have the date of manufacture.
(F) Tire Ply Material
of cord and number of plies in
the sidewall and under the tread.
10-45
The type
: