Pico Macom MX4U Specifications

DISTRIBUTION
Passive Components
55 channel Range 470-806 MHz
(TV 14-69)
Extremely cost effective split-
ting/combining solution for
smaller MATV and SMATV
applications
Separator enables selection of
up to 4 non-adjacent UHF chan-
nels from multiple off-air TV
antennas for best picture quali-
ty mix-and-match system
flexibility
Combiner mixes up to 4 non-
adjacent UHF channels from
single channel off-air antenna
sources into a composite out-
put for headend insertion
Compatible with both analog
and digital signals to provide
format flexibility
Factory custom-tuned for quick
and easy installation saving
time and money
Field re-tunable enables quick
and easy channels reconfigu-
ration with minimum test
equipment
Compact wall-mount design
requires less space for easier
installation and servicing
Compatible with international
channel plans and formats
www.picomacom.com
Passive 4-Channel UHF Separator-Combiner
MX4U
Passive 4-Channel UHF Separator-Combiner
The Pico Macom MX4U 4-channel UHF mixing network is an extremely cost
effective splitting or combining network for use in smaller MATV and SMATV
systems. The user friendly and compact design facilitates easy installation.
Individual channel tuning controls provide accurate quick-and-easy setup or
reconfiguration reducing system down time. The MX4U used as a separator
significantly reduces system harmonics when used prior to a series of Pico
Macom's UBS single channel strip amplifiers or signal processors. The MX4U
used as a combiner is the perfect filtration system to be used when combining
outputs from channel specific UHF antennas before insertion into a cable system
via Pico Macom's TA52 broadband amplifier. In either mode, the MX4U pro-
vides maximum carrier-to-noise and superior picture quality.
MX4U Untuned
MX4UT Tuned
355 Parkside Drive San Fernando, CA 91340
Ph: 818-493-4300 Toll Free: 800-421-6511 Fax: 818-493-4433
MX4U
Series
Series
C-21
Rev. 12/02