[I.exposure]; [Digital Zoom] - Panasonic DMC-FX35 Operating Instructions Manual

Note
• When the burst mode setting is set to Unlimited
–
The burst speed becomes slower halfway. The exact timing of this depends on the type of
card, the picture size and the quality.
–
You can take pictures until the capacity of the built-in memory or the card is full.
•
The focus is fixed when the first picture is taken.
• When the burst speed is set to [˜], the exposure and white balance are fixed at the settings
used for the first picture for the subsequent pictures as well. When the burst speed is set to
[ò], they are adjusted each time you take a picture.
•
When the self-timer is used, the number of recordable pictures in burst mode is fixed to 3.
•
If you are following a moving subject while taking pictures in a place (landscape) indoors,
outdoors etc. where there is a large difference between the light and shade, it may take time
until the exposure is stable. If burst is used at this time, the exposure may not become optimal.
•
The burst speed (pictures/second) may become slower depending on the recording
environment such as in dark places, if the ISO sensitivity is high etc.
•
Burst mode is not cancelled when the camera is switched off.
•
If you take pictures in burst mode with the built-in memory, it will take time to write the picture
data.
•
[Œ] is set for the flash when burst is set.
•
Auto bracket is cancelled when burst is set.
For details on [REC] mode menu settings, refer to P24.
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to how you see.
Applicable modes:
[OFF]/[ON]
Note
•
When [ON] is set, [
• [SENSITIVITY] is changed to [AUTO] when [I.EXPOSURE] is set to [ON] while [SENSITIVITY]
is set at [ISO100].
For details on [REC] mode menu settings, refer to P24.
This can enlarge subjects even more than the optical zoom or extra optical zoom.
Applicable modes:
[OFF]/[ON]
Note
•
Refer to P42 for details.
•
If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] be set to [MODE 1].
Advanced (Recording pictures)

[I.EXPOSURE]

·
] is displayed on the screen.

[DIGITAL ZOOM]

·¿n
- 87 -