Related Manuals for Pico Macom CEF/750
Summary of Contents for Pico Macom CEF/750
- Page 1 CEF/750 Single-Channel Elimination Filter Installation and Operation Manual Operation www.picomacom.com Ph: 800-421-6511 Manual Rev. 06/03...
- Page 2 To insure proper installation and operation, take a moment to read this guide before proceeding with the installation. If you have any questions or comments about the CEF/750 Elimination Filter, please contact your dealer or have him contact the PICO MACOM Service Center at these phone numbers: 800-421-6511, 818-493-4300.
- Page 3 21. Outdoor Antenna Grounding: Before attempting to install this product, be sure the antenna or cable system is grounded so as to CEF/750 provide some protection against voltage surges and built-up static charges.
- Page 4 4 units can be cascaded for multiple channel elimination and reinsertion with negligible interaction. The CEF750 is pre-tuned to any channel in the notch range for easy drop-in installation. Pico Macom backs up this product with its industry leading 5-year limited warranty.
-
Page 5: Specifications
Input Return Loss: Temperature Stability: Dimensions: Weight: Connectors: CEF/750 Front View Rear View Ordering Information CEF/750 – -50 dB minimum -5.5 dB max -5.5 dB max -7 dB max -9 dB max -5.5 dB max -8 dB max -8 dB max... -
Page 6: Operation And Controls
Operation and Controls CEF/750 CEF/750 Single-Channel Elimination Filter Back Panel Control Input: The input RF signal is connected to this port. Tuning Controls: Factory preset tuning adjustments (Do Not Adjust). Ph: 800-421-6511 Rev. 06/03 Output: The RF signal minus the filtered channel is available at this port. -
Page 7: Installation Procedure
2. Line up the side holes of CEF/750 with the tapped equipment rack holes. 3. Insert the provided screws through the side holes in chassis and thread into the tapped equipment rack holes. -
Page 8: Warranty
We will issue an invoice for the List Price of the loaner unit plus shipping costs. When you receive the loaner unit, pack the failed unit in the loaner unit’s box and ship it freight prepaid to Pico Macom for repair. When you receive the repaired unit, a new RMA number will be provided in the box. Carefully pack the loaner unit and affix the new RMA number on the box and ship it back to us for full credit excluding shipping costs.