Pico Macom BMT-7 Specifications

DISTRIBUTION
Passive Components
Broadband 5-900 MHz frequency
range
Bi-directional thru-port ensures
simple foolproof installation
DC power passing at thru-port
and power blocked at tap-port
provides for remote powering
applications and powering the
antenna preamplifier directly
from the headend
Yellow-chromate plated zinc-
alloy diecast housing ensures
excellent ground bonding and
long corrosion-free service life
in indoor/outdoor applications
Epoxy-sealed back cover pro-
vides effective EMI-RFI shielding
>-70dB eliminating signal ingress
to provide distortion free pictures
Precision machined F-connector
threads ensure improved port-
to-connector interface and
accommodate external security
devices
Internal seizing pins provide
improved connectivity to con-
nector center lead
Cast-in mounting-tab with pro-
vided mounting screws enables
easy installation
Voltage blocking capacitor on
Tap port for improved hum
modulation and intermodulation
performance ensures superior
picture quality
Used with TruSpec's BP1 wall-
plate for easy installation
Performance tests conducted
conforming with SCTE standards
IPS TP-201, 202, 203, 406
www.picomacom.com
900MHz Back-Matched Drop Tap
BMT
Series
900MHz Back-Matched Drop Tap
TruSpec's BMT-series commercial-grade back-matched drop taps provide
reliable performance in international and domestic CATV/SMATV distribution
systems. These taps are used in applications requiring the bulk of the signal
passing through one port while reduced signal passes from the tapped port.
This feature ideally suits BMT-series taps for systems using looped or tree
and branch architectures. The unique bi-directional circuit design allows the
tapped port to function regardless of signal flow direction at the thru-ports
simplifying installation and reducing service calls from incorrect installation.
The BMT series features extremely low through-loss performance enabling
longer distribution runs saving cost by reducing amplifier requirements. F-port
threads are precision machined, ensuring easy connector installation and
removal, and improved port-to-connector interface. The zinc-alloy cast case
and epoxy sealed back plate provide superior RFI shielding (-70dB) and a full
environmental seal. Each BMT-series tap is individually tested at the factory
to comply with precise quality standards.
355 Parkside Drive San Fernando, CA 91340
Ph: 818-493-4300 Toll Free: 800-421-6511 Fax: 818-493-4433
BMT
Series
TESTED
C-15
Rev. 12/02