Lenovo ThinkBook 16p Gen 4 Hardware Maintenance Manual page 38

Step 1. Disconnect the battery pack cable from the system board. Remove one screw and then remove the
SSD.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Figure 8. Remove the SSD
Screw specifications
M2 × L2
Step 2. Remove the SSD thermal pad.
Figure 9. Remove the SSD thermal pad
Step 3. Remove the SSD Cu foil.
Figure 10. Remove the SSD Cu foil
32
Lenovo ThinkBook 16p Gen 4 Hardware Maintenance Manual
Number of screws
1