Pico Macom PRR-1 Specifications

Fiber Optic
PRR
T
he Pico Macom PRR series optical return receivers are densely populated receiver units that take an optical input from a
return transmitter and convert it to a 5~200MHz RF signal. Designed to meet CATV applications, each PRR Series receiver
has a wide (-2dBm to 0dBm) optical input range that enables it to maintain a high-output RF level with negligible distortion.
These optical receivers utilize a new low noise, impedance matched, high efficiency 1310/1550nm broadband photodiode and
advanced RF amplification circuitry to facilitate carriage of critical downstream video, data, telephony and Internet traffic in an
HFC broadband environment.
Features
• Available in 1, 2 and 4-receiver configurations.
• Optical power monitoring.
• 5~200MHz return bandwidth for CATV return path.
• High 45dBmV RF output at an optical wavelength of
1310/1550nm provides excellent C/N ratio.
• -20dB RF system test point to monitor the RF output of
the receiver.

www.picomacom.com
Series
Series
Optical Return Receivers
6260 Sequence Drive San Diego, CA 92121
Ph: 858-546-5050 Toll Free: 800-421-6511 Fax: 858-546-5051
• Low power consumption.
• Wide optical window of -2dBm to 0dBm for improved
system performance.
PICO MACOM
Rev. 10/07