Pico Macom PIDA-1000 Installation And Operation Manual
Braodband bi-directional push-pull distribution amplifiers
Hide thumbs
Also See for PIDA-1000:
- Installation and operation manual (12 pages) ,
- Specifications (2 pages)
Related Manuals for Pico Macom PIDA-1000
Summary of Contents for Pico Macom PIDA-1000
-
Page 1: Operation Manual
PIDA-1000 Manual.qxd 6/29/04 11:08 AM Page 1 PIDA-1000 Braodband Bi-directional Push-Pull Distribution Amplifiers Installation and Operation Manual Operation www.picomacom.com Ph: 800-421-6511 Manual Rev. 06/03... -
Page 2: Product Inspection
To insure proper installation and operation, take a moment to read this guide before proceeding with the installation. If you have any questions or comments about the PIDA-1000 Braodband Bi-directional Push-Pull Distribution Amplifiers, please contact your dealer or have him contact the PICO MACOM Service Center at these phone numbers: 800-421-6511, 818-493-4300. - Page 3 PIDA-1000 Manual.qxd 6/29/04 11:08 AM 11. Power Sources: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your appli- ance dealer or local power company.
- Page 4 PIDA-1000 Braodband Bi-directional Push-Pull Distribution Amplifiers The Pico Macom PIDA series two-way broadband distribution amplifiers are high quali- ty dual push-pull amplifiers producing forward and reverse signals with extremely low distortion and high output levels. These amplifiers are designed for bi-directional cable...
-
Page 5: Specifications
PIDA-1000 Manual.qxd 6/29/04 11:09 AM Specifications Forward Path Frequency Range: PIDA-1000 50-1000 MHz PIDA-550 50-550 MHz Channel Loading: 110 Channels Flatness: ±0.75 dB Gain: 30 dB Noise Figure: * 8.5 dB Output Level: +40 dBmV Test Port Level: -30 ±2 dB... -
Page 6: Operation And Controls
PIDA-1000 Manual.qxd 6/29/04 11:09 AM Operation and Controls PIDA-1000 Front Panel Control 1. FWD Output (Rev Input): The amplified 49-550MHz RF signal is available at this port. This port is also the input for 5-36MHz RF signal 2. FWD Slope: Adjustment potentiometer provides for slope adjustment over 49-550MHz bandwidth. -
Page 7: Installation Procedure
Note: The channel loading chart on a previous page shows the proper operation level for the PIDA-550 and PIDA-1000. The setup procedure above and load- ing restrictions assume that the RF source channels are all received at the same amplitude level. Please note the listed performance criteria is for SPE- CIFIC numbers of channels, and must be de-rated accordingly when inserting additional channels. -
Page 8: Limited Warranty
We will issue an invoice for the List Price of the loaner unit plus shipping costs. When you receive the loaner unit, pack the failed unit in the loaner unit’s box and ship it freight prepaid to Pico Macom for repair. When you receive the repaired unit, a new RMA number will be provided in the box. Carefully pack the loaner unit and affix the new RMA number on the box and ship it back to us for full credit excluding shipping costs.