Table of Contents
Advertisement
Getting to know the appliance
en
Use the i-Dos button to select the
dispenser and the dosage quantity
Press the i-Dos button.
Use the buttons below the two left-hand
arrows to select the required dispenser,
e.g. i-Dos iIô.
Use the buttons below the two right-
hand arrows to select the required
dosage quantity, e.g Medium for the
detergent. The selection is
acknowledged by a tick.
Wait or go back to the main menu by
pressing the i-Dos button.
Options × (menu ×) button selected
and select, for example, the
Rinse Hold ($) option:
Using the buttons under the two left-
hand arrows, select the option. Using
the two right-hand arrows, select the
displayed value. The selected options
are active immediately and are
displayed on the display panel.
28
Wait or go back to the main menu by
pressing the Options × (menu ×)
button.
Basic settings 3 sec. (ajuste base 3s.)
buttons selected
Change the appliance setting: e.g.
volume of the end signal ~ Page 57
Using the buttons under the two left-
hand arrows, select the setting. Using
the two right-hand arrows, select the
displayed value. The selection is
acknowledged by a tick.
Wait or go back to the main menu by
pressing the Basic settings 3 sec.
(ajuste base 3s.) (press and hold
again).
Advertisement
Table of Contents
