Supero FatTwin F628R2-FC0 User Manual page 141

Chapter 7: BIOS
Save Changes and Reset
When you have completed the system confi guration changes, select this option
to leave the BIOS setup utility and reboot the computer for the new system
confi guration parameters to take effect. Select Save Changes and Exit from the
Exit menu and press <Enter>.
Save Options
Save Changes
When you have completed the system confi guration changes, select this option to
save all changes made. This will not reset (reboot) the system.
Discard Changes
Select this option and press <Enter> to discard all the changes and return to the
AMI BIOS setup utility.
Restore Defaults
To set this feature, select Restore Defaults from the Exit menu and press <Enter>.
These are manufacture default settings designed for maximum system performance
but not for maximum stability.
Save as User Defaults
To set this feature, select Save as User Defaults from the Exit menu and press
<Enter>. This enables the user to save any changes to the BIOS setup for future use.
Restore User Defaults
To set this feature, select Restore User Defaults from the Exit menu and press
<Enter>. Use this feature to retrieve user-defi ned settings that were previously
saved.
Boot Override
This feature allows the user to override the Boot priorities sequence in the Boot
menu, and immediately boot the system with another device specifi ed by the user.
This is a one-time override.
7-41