Table of Contents
Advertisement
Using the touch pad
The following illustration shows the controls on the touch pad. To enable or disable the touch pad, press
Fn+F6.
Note: Your computer touch pad might look slightly different from the following illustration.
Figure 10. Touch pad
1
Touch pad: To move the cursor on the screen, slide your fingertip over the touch pad in the direction
in which you want the cursor to move.
2
Left-click button: Functions the same as the left button on a conventional mouse.
3
Right-click button: Functions the same as the right button on a conventional mouse.
Using the ThinkPad OneLink Dock
Depending on the model, your computer might support the ThinkPad OneLink Dock (hereafter referred to as
the dock). Attach your computer to the dock to expand the working capability.
This topic provides basic information about the dock. For detailed information about using the dock, refer
to the documentation that comes with the dock.
Notes:
• Depending on the model, your dock might look slightly different from the illustrations in this topic.
• If you attach your computer to the dock and use an Ethernet connector or an HDMI port, use the Ethernet
connector or the HDMI port on the dock, not the one on the computer.
3
2
1
.
Chapter 2
Using your computer
17
Advertisement
Table of Contents
