Sony ILME-FX3 Help Manual page 94

Help Guide
Interchangeable Lens Digital Camera
ILME-FX3
Ver.2 or later
Shooting still images (Intelligent Auto)
This section describes how to shoot still images in the [Intelligent Auto] mode. In the [Intelligent Auto] mode, the camera
automatically focuses and automatically determines the exposure based on the shooting conditions.
Press the MODE (Mode) button, use the control wheel to select [Intelligent Auto], and press the center of
1
the control wheel.
The shooting mode will be set to
Adjust the monitor angle, and hold the camera.
2
When a zoom lens is mounted, enlarge images by using the zoom lever or the zoom ring.
3
Press the shutter button halfway down to focus.
4
When the image is in focus, a beep sounds and the indicator (
Press the shutter button fully down.
5
To select the focus mode yourself (
Specifying a focus mode, such as selecting
(Continuous AF) for moving subjects, makes it easier to focus on the desired subject. You can also specify the focus
position and range using [
Shooting while focusing on human eyes
(Intelligent Auto).
Focus Mode /
(Single-shot AF) for landscapes or still subjects and selecting
Focus Area].
, etc.) lights up.
Focus Area)
94