Table of Contents
Advertisement
Warning and Safety instructions
Technical safety
~
Before setting up the machine, check it for any externally visible
damage.
Do not install or use a damaged machine.
~
The electrical safety of this machine can only be guaranteed
when correctly earthed. It is essential that this standard safety
requirement is met. If in any doubt please have the electrical
installation tested by a qualified electrician. The manufacturer
cannot be held liable for the consequences of an inadequate
earthing system (e.g. electric shock).
~
Unauthorised repairs could result in unforeseen dangers for the
user, for which the manufacturer cannot accept liability. Repairs
should only be undertaken by a Miele approved service technician.
If this is not done, any resultant damage will not be covered by the
guarantee.
Ensure current is not supplied to the machine until after
maintenance or repair work has been carried out.
~
Do not make any alterations to the machine, unless authorised to
do so by Miele.
~
The machine must be isolated from the electricity supply in the
event of a fault and during installation, maintenance and repair work.
See also "Electrical connection".
~
This machine must only be connected to the on-site water supply
using a new hose kit. Old hoses must not be re-used. Check the
hose regularly for signs of wear. Change in good time to avoid the
risk of leaks and subsequent damage.
8
Advertisement
Table of Contents
