Table of Contents
Advertisement
HOTEL MODE
Description of "Hotel" and "Rental" modes
This mode of working is thought for its use in hotels, hospitals and another public establishments. Its features are:
Maximum volume is limited to the level that already exists when the mode is enabled.
!
There is no access to Tuning menu of channels (neither fine-tuning nor swapping, ...).
!
The TV set always boots with values of normalization and it is not allowed the adjustment from the user was memorised.
!
There is an access neither the language selection or child lock.
!
It is possible to be forced that the TV set always switch on in a certain program (between 1 and 8) or in AV1.
In order to enable this mode, hold the 'Vol-' key from the local keyboard pressed and press 'Recall' on the remote control. A message like " HOTEL: 00 " will be
shown, waiting for the input of two digits. The meaning of these digits is:
First digit:
'0': normal mode
'1': HOTEL mode
'2': RENTAL mode
Second digit:
'0': It switches on into the same channel as it was switched off (normal mode).
'1' to '8': It switches on into the selected programme (1 to 8).
'9': It switches on into AV1
The 'RENTAL' mode has the same features as the 'HOTEL' mode and, additionally, the keys of the local keyboard are inhibited, so it is only possible to change
the programme with the remote control. In order to quit this mode, the colour saturation, it is necessary to set the saturation colour level to 0.
19
Advertisement
Table of Contents
