Table of Contents
Advertisement
[DEMO MODE]
This item is used to start the unit demonstration.
: [SETUP] # [DEMO MODE] # [ON]
MENU
≥ If [DEMO MODE] is switched to [ON] and you touch [EXIT] when there is no SD card inserted and
while this unit is connected to the AC adaptor, the demonstration automatically starts.
If any operation takes place, the demonstration is cancelled. However if no operations take place
for approx. 10 minutes, the demonstration automatically starts again. To stop the demonstration,
set [DEMO MODE] to [OFF] or insert an SD card.
[O.I.S. DEMO]
This item is used to start the Optical Image Stabilizer demo.
: [SETUP] # [O.I.S. DEMO]
MENU
≥ Touch [O.I.S. DEMO], the demonstration automatically starts.
When you touch [EXIT], the demonstration will be cancelled.
[Eye-Fi TRANSFER]
This item is displayed only when an Eye-Fi card is inserted.
Please refer to page 118.
[Eye-Fi DIRECT]
This item is displayed only when an Eye-Fi card is inserted.
Please refer to page 119.
[LANGUAGE]
You can select the language on the screen display and the menu screen.
: [SETUP] # [LANGUAGE] # desired language
MENU
- 39 -
Advertisement
Table of Contents
