Transport Protection For The Door; Placing The Dishwasher; Adjust The Height And Slide The Dishwasher Into Place - Asko DFS244IB.W/1 Operating Instructions Manual

Table of Contents

Advertisement

Installation

Transport protection for the door

Do not forget to remove the transport protection for the door when unpacking the dishwasher.

Placing the dishwasher

The dishwasher can be installed under a worktop or freestanding. Make sure the area on which the
dishwasher is to be installed is firm.

Adjust the height and slide the dishwasher into place

Freestanding
1. Make sure the area on which the dishwasher is to be installed is firm. Adjust the dishwasher's
height using the four feet so that the dishwasher is level. The dishwasher may lean no more than
5 mm.
2. Lock the steel feet with the lock nuts.
3. Once the feet are properly adjusted, tighten the anti-tip feet firmly against the floor.
Anti-tip feet
38
16 mm
24 mm

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dfs244ib.s/1

Table of Contents