Table of Contents
Advertisement
Selecting the language
1
Connect the TV to your AC power outlet
(110-240 V AC, 50/60 Hz).
2
Press 1 on the top edge of the TV.
When you turn on the TV for the first time, the
"Language" menu appears on the screen.
3
F
f
Press
/
to select the language displayed
on the menu screens, then press
Auto-tuning the TV
4
G
g
Press
/
to select "OK", then press
The TV starts searching for all available channels.
This may take some time, please be patient and do
not press any buttons on the TV or remote.
If a message appears for you to confirm the
antenna connection
No programmes found. Please connect antenna
(aerial) and select "Confirm" to start auto-tuning
again. If 100 channels are found, auto-tuning is
stopped.
5
When the "Programme Sorting" menu
appears on the screen, follow the steps of
"Programme Sorting" (page 30).
If you do not change the order in which the channels
are stored on the TV, go to step 6.
6
Press MENU to exit.
The TV has now tuned in all the available channels.
7
G
g
Press
/
to select the desired setting in
"Display this menu next time?" dialogue,
then press
to exit.
z
If "Yes" is selected and the TV is turned off by pressing
1 on the TV, or is disconnected from the AC power
outlet, the auto start-up procedure restarts the next time
the TV is turned on.
6
GB
.
English
Adjusting the viewing
angle of the TV
This TV can be adjusted within the angles shown
below.
Adjust the angle left and right (swivel)
.
Top view
Front
Advertisement
Table of Contents
