Xerox DocuPrint 4890 Manual page 21

Feeder trays
1-5
5. Squeeze the lever against the back of the length guide and
slide the guide toward the back of the printer.
6. Remove any paper remaining in the tray and set it aside to be
placed on top of the new paper.
7. Load paper, following the instructions at the front of the
feeder tray and carefully positioning the paper in the right-
front corner of the tray.
8. Pull the length guide forward to touch the back of the paper
stack.
9. Latch the paper feeder assembly by pressing the green dot
next to the green release lever until the assembly clicks into
position.
Guide to Performing Routine Maintenance