Lenovo ideapad 110 User Manual page 31

4
Loosen the keyboard with a prying tool
5
Lift the keyboard slightly
arrows and
6
Reconnect the keyboard connector and install the new keyboard. Push the keyboard in
gently until it clicks into place.
Note: Make sure that the keyboard connector is attached firmly.
7
Close the computer display and turn the computer over.
8
Reinstall and tighten the screws.
9
Reinstall the compartment cover and tighten the screws.
0
Turn the computer over again.
A
Connect the AC power adapter and the cables to the computer.
. Disconnect the keyboard connector in the direction shown by
. Then remove the keyboard.
.
27
Appendix A. CRU instructions