3. Slide the keyboard in the direction as shown. Ensure that the latches are secured under the keyboard
frame.
4. Turn the computer over. Then, tighten the screws to secure the keyboard.
5. Configure the keyboard language in UEFI BIOS:
a. Enter the UEFI BIOS menu. See "Enter the UEFI BIOS menu" on page 33.
b. Click Config ➙ Keyboard/Mouse ➙ Keyboard Layout, and then select your keyboard language.
Base cover assembly
Prerequisite
Before you start, read
Generic Safety and Compliance Notices
Notes: Do not remove the base cover assembly in the following situations. Otherwise, there might be a risk
of short circuits.
• When your computer has the removable battery installed
• When your computer is connected to ac power
and print the following instructions.
Chapter 6
.
45
CRU replacement