Change Grating Screen - Master Mill 500 Instructions For Use And Maintenance Manual

The table below specifies the main characteristics of the three commercialized grating screen models:
CODE
PMM5-34-a
PMM5-29-A
PMM5-30-A
**If an application requires a different or special size grating screen, contact Master Products or any of their authori-
zed distributors.

12.1. Change grating screen

To change a grating screen on the equipment, it is necessary to follow the following steps:
1. Press the red OFF switch on the control panel to stop the equipment.
2. Disconnect the equipment from the electrical current by unplugging the power cord.
The equipment must be stopped and disconnected to be able to manipulate it.
DEGREE GUY
VERY DELICATE HOLE
FINE HOLE
AGGRESSIVE HOLE
www.masterproducts.es
SIZE
Ø1.5
Ø3
Ø6
¡IMPORTANT!
LEVEL
VERY SOFT
GENTLE
AGGRESSIVE
29