Set Up A Proxy Server With The Auto Proxy Mode; Set Up A Proxy Server With The Manual Proxy Mode - Cisco 6800 Series User Manual

Settings

Set Up a Proxy Server with the Auto Proxy Mode

You can choose the auto proxy mode to set up an HTTP proxy server on the phone.
Procedure
Step 1 Press Applications
Step 2
Select Network configuration > HTTP proxy settings > Proxy mode.
Step 3 Press the Select button of the navigation cluster to choose Auto.
Step 4
Highlight Auto discovery (WPAD), select On to turn on Web Proxy Auto-Discovery (WPAD) that is used
to retrieve a PAC file automatically, select Off to turn off WPAD.
By default, your phone uses WPAD in the auto proxy mode.
Step 5 (Optional) If you turn off WPAD in the previous step, you need to further enter a valid Proxy
Auto-Configuration (PAC) URL in PAC URL. For example:
http://proxy.department.branch.example.com/pac
If you don't have the PAC URL, contact your administrator.
Step 6 Press Set to apply the settings.

Set Up a Proxy Server with the Manual Proxy Mode

You can choose the manual proxy mode to set up an HTTP proxy server on the phone.
Before you begin
Your administrator provides you the server address and port of the proxy server.
Procedure
Step 1
Press Applications
Step 2 Select Network configuration > HTTP proxy settings > Proxy mode.
Step 3
Press the Select button of the navigation cluster to choose Manual.
Step 4 Enter a valid hostname or IP address of a proxy server in Proxy host.
Note
Step 5 Enter a valid server port of the specified proxy server in Proxy port.
Step 6
(Optional) If your proxy server requires authentication, highlight Proxy authentication and then select On.
Step 7 (Optional) Enter your username and password to access the proxy server.
If you don't have the username and password, contact your administrator.
.
.
Do not provide the scheme (
Set Up a Proxy Server with the Auto Proxy Mode
or ) for the proxy host.
http:// https://
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
145