Hunter Pacer Installation Manual page 8

1886
Secure each blade to a blade iron as shown using the blade nuts, found in the
hardware bag, and the blade assembly screws, found in the
Repeat x6
Note:
Fan style may vary.
Ridge
Note:
Fan style may vary.
7
Ceiling Bracket Downrod
Installing the Canopy
Lift the canopy into place so that
the screw holes are aligned.
Installing the Blades:
hardware bag.
IMPORTANT
NOTE: The blade arms should be mounted with
the ridge facing downward. Installing it incorrectly
could result in your fan not functioning.
Hanging Fan Wiring
Insert the two canopy screws
found in the
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.
Canopy Blades Light
hardware bag.
Canopy Screw
bag
Blade Screw
bag
Blade Nut
bag
IMPORTANT
Blade Arm Screw
bag
Lightly attach the blade arms to the motor with
screws found in the hardware bag, then
securely tighten after both screws are attached.
Repeat x6
Bulbs Remote
x2
x18
x18
x12
Troubleshooting