Attaching The Embroidery Unit - Brother NQ3700D Operation Manual

Embroidering Preparation
e Hold the embroidery foot in place with your right
hand, and then use the included screwdriver to
securely tighten the presser foot holder screw.
CAUTION
• Use the included screwdriver to firmly tighten
the screw of the embroidery foot. If the screw
is loose, the needle may strike the presser foot
and possibly cause injury.
f Press to unlock all keys and buttons.

Attaching the embroidery unit

CAUTION
• Before attaching the embroidery unit, be sure
to turn off the machine. Otherwise, injuries
may occur if one of the operation buttons is
accidentally pressed and the machine starts
embroidering.
• Do not move the machine with the embroidery
unit in place. The embroidery unit may be
dropped and cause injury.
• Keep your hands and other objects away from
the embroidery carriage and frame when they
are moving. Otherwise injury may result.
a Turn off the machine.
b Pull the flat bed attachment off to the left.
80
c Slide the tab on the cover of the connection port in the
direction of the arrow to open the cover.
Note
• Be sure to close the cover of the connection port
when the embroidery unit is not being used.
d Insert the embroidery unit connection into the
connection port, and then lightly push in the
embroidery unit until it snaps into place.
3
1 Connection port
2 Embroidery unit connection
3 Carriage
Note
• Make sure that there is no gap between the
embroidery unit and the machine, otherwise the
embroidery pattern may not be embroidered
correctly. Be sure to fully insert the connector into
the connection port.
• Do not push on the carriage when attaching the
embroidery unit to the machine, otherwise damage
to the embroidery unit may result.
• Do not touch the connector in the embroidery unit
connection slot. The connector could be damaged,
and it may cause malfunctions.
• Do not lift up on the embroidery carriage, and do
not forcefully move it. It may cause malfunctions.
e Turn on the machine.
 A message appears in the screen.
Note
• If [Opening Screen] is set [ON] within the settings
screen, touch screen for the following message to
appear.
1
2