Scheduling The Washing Time - Beko KDIT Series User Manual

Changing SelfDry Settings
1. Press the Delay and P/P+ key
simultaneously after turning on your
machine. Keep pressing until the
countdown on the screen displayed as
3, 2, 1 is completed.
2. Press P / P+ key, and move to the o:
position on the screen. "o: 0" position
indicates that the SelfDry feature is off
"o: 1" position indicates that it is on.
Select the desired position with the
delay key.
3. Turn off your machine with the On/Off
key to save the setting.
EverClean Filter
(depends on the model)
With this function, your micro filter will be
cleaned by a special system at the end of
washing cycle and it is made ready for use
for the next usage of the machine. This
cleaning process increases the cleaning
period of the micro filter from 2 weeks to
3 months and thus boosts the washing
performance. Employing this function in
every washing cycle is recommended in
order to get the most out of it.
Interior Lighting
(depends on the model)
Some models have interior lighting to
illuminate the interior when the door is
opened.
1. After switching on your machine,
press Time Delay and P / P+ keys
simultaneously. Keep them pressed
until the countdown 3, 2, 1 is
completed on the display.
2. Press P / P+ key to move to the L:
position on the display. Interior lighting
is off in "L:0" position and on in "L:1"
position. Select the position you want
with the Time Delay key.
3. Switch off the machine with the On/Off
key to save the changes.

Scheduling the washing time

Time Delay
If an economical electricity tariff is applied
in your region, you can use the Time
Delay function to wash your dishes during
appropriate hours.
You can delay the start of the selected
programme until 24 hours.
1. Press the Time Delay function key after
selecting the washing programme and
other auxiliary functions.
2. Once you press the Time Delay key,
Display Information Line will show "0:30"
and Time Delay indicator will start flashing.
3. Set the desired time by pressing the
Time Delay key. Time will increase with
increments of 30 minutes up to 6 hours
and after that in 1 hour increments up to
24 hours every time you press the key.
4. Close the door of your machine after
setting the Delayed Start. Once the delay
time is over, the selected programme will
start automatically.
Changing the settings while Time
Delay function is active
While the Time Delay function is activated,
you cannot make changes in the washing
programme, auxiliary functions or the duration
of delay time.
Programme and auxiliary functions cannot
be set/changed after the programme has
started.
To cancel the Time Delay function
Open the door of the product Press and
hold the Programme Selection / Programme
Cancel keys for 3 seconds. After the 3 - 2 - 1
countdown, 0:01 is displayed, close the door of
the product and wait for the draining process
complete. Draining is completed in 2 minutes
and the machine gives an audible warning
when it is completed.
You can select and start a new
programme following the cancellation of
Time Delay function.
35/EN