Steps
Place the display back cover on a flat surface.
Next steps
1. Install the
display
hinges.
2. Install the
sensor
board.
3. Install the
eDP/display
4. Install the
camera
module.
5. Install the
display
panel.
6. Install the
display
bezel.
7. Install the
display
assembly.
8. Install the
WWAN
card.
9. Install the
wireless
card.
10. Install the
base
cover.
11. Install the
microSD
card.
12. Install the
SIM
card.
13. Follow the procedure in
Dummy SIM-card slot filler
Removing the dummy SIM-card slot filler
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
card.
3. Remove the
microSD
4. Remove the
base
cover.
5. Remove the
memory
module.
6. Remove the
2280 solid-state drive
7. Remove the battery.
8. Remove the
hard
drive.
cable.
After working inside your
Before working inside your
card.
or
2230 solid-state
computer.
computer.
drive.
Removing and installing components
115