Steps
1. Place the DC-in module into the provided slot.
2. Install the (M2x3) screw and connect the DC-in cable to the system board.
3. Fold and align the hinge to the screw holders on the palmrest.
4. Install the two (M2.5x5) and one (M2.5x4) screws to secure the hinge.
Next steps
1. Reconnect the
battery
2. Install the
base
cover.
3. Install the
SD
card.
4. Follow the procedure in
cable.
After working inside your
computer.
Disassembly and reassembly
33