Cooper Lighting FAIL-SAFE HMS24CR Specification Sheet

DESCRIPTION
The Fail-Safe HMS24CR series combines maximum corrosion resistance and
energy-saving technology for your toughest industrial environment. The
surface-mounted luminaire utilizes a stainless-steel continuously welded
one-piece housing, minimizing the number of components exposed to the
harsh environment. The HMS24CR is ready for the toughest environments.
Ceiling mount, U.L.-listed and C.S.A.-certified for wet location.
SPECIFICATION FEATURES
Applications
The HMS24CR series is an
excellent choice for all corrosion-
prone industrial environments.
Consideration should be given to
any atmosphere consisting of
acids, alkalis, salts, gases or water.
Critical locations are where con-
densation, vaporization, heating
and cooling may occur. Applica-
tions include high ceilings where
H.I.D. lamp sources are the most
cost-effective manner to illuminate
the area.
A ... Lens
Choice of prismatic polycarbonate
or prismatic tempered glass.
Consult ordering information.
B
G
MOUNTING DIMENSIONS
(4) 3/8" [10mm]
Dia. Mtg. Holes
9 7/16"
[240mm]
18 7/8"
[480mm]
24"
[610mm]
Specifications and Dimensions subject to change without notice.
B ... Fasteners
Four stainless-steel fasteners.
Phillips head is standard. Also
available with tamper-resistant
screws.
C ... Housing
Die-formed 20-ga. stainless-steel
body with continuously welded
and ground ends to form a
one-piece seamless housing for
maximum resistance to the
environment. Standard 304
stainless-steel, cold-rolled and
annealed, with a natural brushed
finish.
D ... Lamps
(By Others)
E D
20"
[508mm]
24"
[610mm]
(2) 7/8" [22mm]
2 1/4" [57mm]
Dia. KO
Dia. Access Hole
9"
[229mm]
24"
[610mm]
Consult your representative for additional options and finishes.
Catalog #
Project
Comments
Prepared by
E ... Hinge
Stainless-steel internal hinge
allows for easy maintenance and
reduces the number of parts
exposed to the environment.
F ... Door Frame
Die-formed 20-ga. stainless-steel,
cold-rolled and annealed with
overlapping corners.
G ... Ballast
Copper wound, HPF ballast is
standard.
Labels
U.L.-listed, C.S.A.-certified,
standard wet label.
A H C I
18"
[457mm]
TORX ® is a registered trademark
of Camcar Division of Textron Inc.
FAIL-SAFE
HMS24CR
High Pressure Sodium
STAINLESS-STEEL
SURFACE LUMINAIRE
13"
[330mm]
F
E N E R G Y D A TA
Input Watts:
(1) 250W High Pressure Sodium: 300W
(1) 250W Metal Halide: 295W
(1) 400W High Pressure Sodium: 465W
(1) 400W Metal Halide: 455W
04/10/2007 9:17:31 AM
®
Type
Date
250W - 400W
Metal Halide
165W
QL Induction
ADC041723