Using Color Options - HP HC241 User Manual

Table 2-1 OSD menu options and descriptions (continued)
Main Menu
Management
Sanitization
Information
Exit

Using color options

This monitor has been certified as compliant with DICOM (Digital Imaging and Communication in Medicine)
Part 14. The monitor can be used by clinicians to view medical images for clinical review, peer consultation,
patient consultation, or image verification. The monitor is not intended for use in diagnosis, cure, treatment,
or prevention of human disease or other medical conditions.
NOTE: DICOM modes are not supported on the HP HC241p model due to the embedded privacy filter.
The monitor is factory-calibrated, and the default color setting is DICOM (0.0 ALC). To change the color setting
to another preset or custom setting:
1. Press the
2. Navigate to and highlight the Color menu, and then select a color setting.
3. Then click Save and Return.
NOTE: When viewing medical images, make sure the monitor color setting is set to DICOM.
The following table lists the options on the Color Control menu.
Table 2-2 Color Control menu options and descriptions
Main Menu
DICOM (0.0 ALC)
DICOM (2.2 ALC)
Neutral
Cool
Warm
Custom RGB
14 Chapter 2 Using the monitor
Description
Adjusts the DDC/CI settings, language selection setting, and returns all OSD menu settings to the
factory default settings.
Enables the sanitization log, updates the sanitization log, opens the view sanitization log, and sets the
hourly alert schedule.
Selects and displays important information about the monitor.
Exits the OSD menu screen.
Menu button on the front panel of the monitor to open the on-screen display menu.
Description
Sets the screen to DICOM Part 14 GSDF at zero ambient light compensation setting.
Sets the screen to DICOM Part 14 GSDF at 2.2 ambient light compensation setting for darker viewing
conditions.
Sets the color scheme to a point in the 6500K color temperature range.
Sets the color scheme to a point in the 9300K color temperature range.
Sets the color scheme to a point in the 5000K color temperature range.
Allows you to select and adjust your own color levels.
R: Set the red color levels.
●
G: Set the green color levels.
●
B: Set the blue color levels.
●