LG L600V User Manual page 90

all the data in the server database.
- Restore
The server sends all its data from a database to
the phone. The phone is expected to replace all
data in the target database with the server sent
by the server. This means the server overwrites
all data in the phone database.
Access point: Select an access point to use for
]
the data connection.
Network
Network selection
Select between Automatic and Manual.
Automatic: Automatically searches for the network
]
and registers the handset to the network. This is
recommended for best service and quality.
Manual: All the currently 2G(GSM) and
]
3G(UMTS) available networks are shown and you
can select one of them for registration. If the
registration of the network has failed, all the
currently available networks are listed again and
you can select any other one for registration.
Network mode
You can set a type of network to search for when
networks are searched in the Network selection menu.
Automatic: Searches all the networks connectable.
]
UMTS: Searches only networks supporting 3G.
]
GSM 900/1800: Searches only networks
]
supporting GSM 900/1800 band.
GSM 1900: Searches only networks supporting
]
GSM 1900 band.
Preferred lists
(Menu #.7.3)
If the network is searching automatically, you can add
a preferable network to be connected to. And the
following options are available.
Add new: You can add a new network using the
]
followings.
- Search: You can select one from the network list
stored in the phone.
- Enter new network: You can enter the country
code (MCC) and the network code (MNC) to
add. After setting, press Done key.
Delete: Deletes the selected network.
]
Edit: You can modify the information of the
]
selected network.
89