Sony ZV-1M2 Help Manual page 319

4.
Launch Creators' App on your smartphone and open the [Cameras] screen.
5.
Select the (Setup) button in the upper right corner of the [Cameras] screen, and then select [Connect only via Wi-
Fi].
6.
Follow the instructions on the screen and open the Wi-Fi setting screen on your smartphone.
7.
On the Wi-Fi setting screen on your smartphone, select the SSID displayed on the camera and enter the password.
8.
Switch the screen back to Creators' App on your smartphone and select the product name of the camera (ZV-1M2).
The smartphone will connect to the camera.
Note
[Smartphone Connection] cannot be executed when [Airplane Mode] is set to [On].
Up to 2 devices can be connected to the camera at the same time using Bluetooth communication.
Radio wave interference may occur as Bluetooth communications and Wi-Fi (2.4 GHz) communications use the same frequency
band. If your Wi-Fi connection is unstable, it may be improved by turning off the Bluetooth function of the smartphone.
The Bluetooth icon is not displayed when the touch function icons are displayed in the movie recording mode. To see the
Bluetooth icon, swipe the touch function icons left or right to hide the touch function icons.
Related Topic
Functions available with a smartphone (Creators' App)
Using a smartphone as a remote commander
Select on Cam & Send (transferring to a smartphone)
Cnct. while Power OFF (smartphone)
Reading location information from a smartphone
5-049-603-11(1) Copyright 2023 Sony Corporation
319