Selecting A Stitch - Brother 885-E44 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Selecting a stitch

Using the stitch selection keys, select the desired
stitch.
When the sewing machine is turned on, the straight
stitch ( left needle position) is selected.
Turn on the sewing machine.
a
Press
b
number of the selected stitch is displayed.
Press the "+" or "–" side of
reduce the number by one. Pressing
right changes the digit on the right and pressing
on the left changes the digit on the left.
 The stitch is selected.
Memo
● The pattern numbers of the stitches are
displayed on the machine.
(stitch selection keys). The
to increase or
Attach the presser foot indicated in the LCD.
c
a Presser foot type
• For details, refer to "Replacing the presser
foot" (page 36).
Memo
● The presser foot to be used is indicated by
the letter (J, A, etc.) that appears above or
beside the stitch number.
If necessary, adjust the stitch length and
d
width.
• For details on sewing with each of the stitches,
refer to the following example.
on the
2
39