SALES REPRESENTATIVE # _____________________ DEALER NAME ________________________________ OPERATIONS GUIDE NUMBER ___________________ PUBLISHED __________________________________________ Copyright 1995 Windsor Industries, Printed in USA YOUR DEALER Name: __________________________________________________________________________________________________ Address: _______________________________________________________________________________________________ For the name and address of your dealer contact: Windsor Industries Phone Number: _________________________________________________________________________________________ WH 98711 12/15/99...
SERIAL NO. FROM – column indicates Parts may be ordered from authorized Windsor the first machine the part number is dealers. When placing an order for parts, the applicable to. When the machine design...
TABLE OF CONTENTS Machine Data Log/Overview......2 HOW TO USE THIS MANUAL How to use this Manual........ 3 Table of Contents ........4 SAFETY Important Safety Instructions ....... 5 Hazard Intensity Level......... 6 Grounding Instructions......... 7 OPERATION Set Up..........……….8 On/Off Procedure......
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. WARNING: To reduce the risk of fire, electric shock, or injury: Use only indoors. Do not use outdoors or expose to rain. Use only as described in this manual.
Unless Operation Guide is Read and understood. In Flammable or Explosive areas. In areas with possible falling objects. WHEN SERVICING MACHINE: Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the machine. Use Windsor approved replacement parts. WH 98711 12/15/99...
GROUNDING INSTRUCTIONS THIS PRODUCT IS FOR COMMERCIAL USE ONLY. ELECTRICAL: In the USA this machine operates on a standard 15 amp 115V, 60 hz, A.C. power circuit . The amp, hertz, and voltage are listed on the data label found on each machine. Using voltages above or below those indicated on the data label will cause serious damage to the motors.
OPERATION & MAINTENANCE SET UP POWER CORD/CAPACITOR 1. Turn knob clockwise to loosen nut. Remove nut from stud, (pg. 10, item #6). Remove knob Power cord and capacitor can be serviced by assembly from lower handle. removing the fan cage (p/n 34132) and the air flow 2.
Page 11
BODY/HANDLE PARTS LIST SERIAL NO. PART NO. DESCRIPTION NOTES: FROM 36196 GRIP, POLISHER HANDLE 38245 HANDLE, UPPER WINDHANDLER 48025R KNOB, 1.75 X 3/8-16 F 87003 WASHER, 3/8 ID X 7/8 OD SS 70654 STUD, 3/8-16 X 2.25”L PLTD 57032 NUT, 3/8-16 SERRATED FLANGE 38244 HANDLE, LOWER WINDHANDLER 57030...
Page 13
SWITCH/WHEEL PARTS LIST SWITCH PARTS LIST SERIAL NO. PART NO. DESCRIPTION NOTES: FROM 48029 KNOB, ROTARY SWITCH 57017 NUT, 15/32-32 HEX PANEL ZINC PL 57187 NUT, 6-32 ACORN ZINC 87138 WASHER, # INT STAR ZINC PLTD 62333 PLATE, (GE) SWITCH 70448 SCR, 6-32 X ½...
SUGGESTED SPARE PARTS LIST/NOTES SUGGESTED SPARE PARTS LIST SERIAL NO. PART NO. DESCRIPTION NOTES: FROM 72120 SWITCH, 3 SPEED ROTARY 27272 CAPACITOR, 15 MFD 370V 50/60HZ 09023 BEARING ASM, SHAFT SUPPORT NOTES WH 98711 12/15/99...
If proof of purchase cannot be identified, the warranty start date is 90 days after date of sale to an authorized Windsor distributor. Parts replaced or repaired under warranty are guaranteed for the remainder of the original warranty period.