Changing The Display Language; Holding This Unit; Tripod Mounting - JVC Everio GZ-E15 Detailed User Manual

Getting Started

Changing the Display Language

The language on the display can be changed.
Memo :
To select/move cursor towards up/left or down/right, press the button UP/<
or DOWN/>.
1
Press MENU.
2
Select "DISPLAY SETTINGS" and press OK.
Press UP/< or DOWN/> to move the cursor.
0
To cancel and return to the previous screen, press MENU.
0
3
Select "LANGUAGE" and press OK.
Press UP/< or DOWN/> to move the cursor.
0
To cancel and return to the previous screen, press MENU.
0
4
Select the desired language and press OK.
Press UP/< or DOWN/> to move the cursor.
0
To cancel and return to the previous screen, press MENU.
0
18

Holding this Unit

When holding this unit, keep your elbows close to your sides to prevent
camera shake.
Caution :
Be careful not to drop this unit during transportation.
0
Guardians should pay close attention when this unit is being used by
0
children.
Memo :
If camera shake is excessive, use the image stabilizer.
0
"Reducing Camera Shake" (A p. 30)

Tripod Mounting

This unit can be mounted on a tripod (or monopod). This is useful for
preventing camera shake and recording from the same position.
To prevent this unit from falling off, check the tripod mounting screw holes
0
and positioning holes on the unit carefully before mounting, and turn the
screws until they are fastened firmly.
Caution :
To prevent injuries or damages which may result if this unit falls off, read
0
the instruction manual of the tripod (or monopod) to be used and make
sure that it is securely attached.
Memo :
It is recommended to use a tripod or monopod when recording in
0
conditions prone to camera shake (such as in dark places or when zoomed
to the telephoto end).
Set the image stabilizer to b (OFF) when using a tripod for recording.
0
"Reducing Camera Shake" (A p. 30)