Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a RYOBI c) Avoid accidental starting. Ensure the switch is in the OFF service facility for a free replacement.
1. Push the tool sleeve toward the drill body and hold. 2. Remove the bit from the front cap. SPECIFICATIONS DUST PROTECTION CAP ED-850 ED-1050 RH-1432 When drilling upward, push dust protection cap over the drill, with the open side showing towards the end of the bit. Empty as often as is...
4. Worn carbon brushes are to be replaced only by a specialist workshop. It is recommended that you take this tool to a Ryobi Authorized Service Center for a through cleaning and lubrication at least once a year.
Page 8
RYOBI tool (hereinafter called “the Product”), is warranted by Ryobi (herein called “the and no repairs, alterations or modifications Company”) to be free from defects in material...